Viking Labs Buildplate Adhesive

Description

Buildplate adhesive for PLA, PET-G & FLEX is a water-based powerful adhesive for FDM 3D printer to eliminate warping. Due to the thermal shrinking and internal stress during cool down the 3D printed part can lift off the build plate. An appropriate buildplate adhesive secures the first layer of the print to the build plate.

Application

for securing a 3D print to the build plate

Only apply on a clean and cold glass build plate. Release liquid by pressing against the build plate and distribute in circular motions. Apply thin even layer for best results. Let dry during the heat-up process. To remove resiude, use warm water.

Not a dangerous good according to Regulation 1272/2008

General precautions

Contains 1,2-benzisothiazol-3(2H)-one; 2-methyl-2H-isothiazol-3- one; reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1): May produce an allergic reaction. Wear protective gloves and eye protection. If on skin: wash with plenty of water.

Technical Data

Chemical: color white

Odor: similar to glue

Chemical Type: Adhesive

Disposal of buildplate adhesive

If possible, use container until empty. Leftover liquid can be left to dry out. Dry leftovers can be disposed of with household waste.