Bambu Lab Textured PEI Plate (Dual sided) - A1 Mini

Bambu Lab Bambu Lab

Bambu Lab Textured PEI Sheet for Bambu Lab A1 Mini

  • Excellent first-layer adhesion
  • Texture surface finish
  • Compatible with various filament materials

More details

In stock online & store

40-042

31,55 EUR

tax incl.

Excellent first-layer adhesion, Improved durability

After optimizing the manufacturing process of the Bambu Texture PEI Plate, the durability of the plate is enhanced. Additionally, the adhesion between the prints and the plate is significantly improved, eliminating the need for adhesives.
*In some situations, glue is required for very specific filaments
Surface Finish

Self-release when cooled down

PEI is an excellent material for 3D printing applications due to its ability to withstand the repeated heating and cooling cycles of a printer heatbed. Prints come off easily when the temperature of the heatbed reaches room temperature, and we always recommend waiting until it reaches 35℃ or lower. If the print is still adheres to the plate, simply bend the steel plate and the model will fall right into your hands.

Textured surface finish

Bambu Texture PEI Plate offers a one-of-a-kind first-layer surface. Through the application of a powder-coating process, this PEI Build Plate creates a rugged texture that adds a texture to your prints.

Compatibility with various filaments, especially for PLA

PEI enables printing with common materials such as PLA, TPU, PETG and PVA.
*Please apply liquid glue or a glue stick to prevent the sheet from tearing if print filament other than PLA

Considerations

 

  • Increasing the temperature of the heatbed enhances the adhesion of the filament to the build plate. Users can adjust the temperature of the heatbed or apply glue if additional adhesion is needed.

  • During the printing process, dust and grease on the surface of the build plate can negatively impact material adhesion. It is recommended to regularly clean the surface with detergent and water to eliminate any dust or grease residue first. If it doesn't work, clean the surface with alcohol.

  • Wait until the build plate fully cools down to prevents damage to the plate and prints when removing the printed parts.

  • Do not clean the plate with acetone, as it will damage the PEI surface.

  • Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.

  • The Textured PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.

 

Installation Steps

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 2: Lower the plate and secure to the magnetic platform

Step 2: Lower the plate and secure to the magnetic platform

Product Specification

Material
PEI powder coating+ Stainless Steel Plate
Surface temperature resistance
Up to 180℃
Flexible stainless steel plate thickness
0.4 mm
Textured PEI coating thickness
0.075 mm
Usable print size
180*180 mm
Package size
220*195*15 mm
Package weight
230 g
Color
Gold

  Bambu Textured PEI Plate, Excellent first-layer adhesion, Improved durability

 

Recommended Settings

Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements

Materials Heatbed Tempe rature Glue Stick Required?
PLA/PLA-CF/PLA-GF 45~60℃ No
PETG/PETG-CF 60~80℃ Glue Stick/Liquid Glue
TPU 35~45℃ Glue Stick/Liquid Glue
PVA 45~60℃ Glue Stick/Liquid Glue

Write your review

Write your review